Tutorial How to Install Windows 7, 8 with Flashdisk

How to install windows 7, 8? 

Here is a complete tutorial on installing windows 7 operating system on pc, laptop, or computer with pictures, very useful for beginners and also experienced. This guide can also be used to re-install from scratch with CD / DVD. This installation applies to every edition including basic, home, professional, ultimate, 32-bit and 64-bit.

How to Install windows 7, 8 with flash ? Here are the steps about installing windows 7 system from USB / flash using Wintoflash Software on PC, Laptop, or computer. This installation applies to laptops or computers of various brands: Asus, Acer, Lenovo, Samsung, HP, Dell, LG, Toshiba, etc.

Transfer Windows 7, 8 to Flashdisk

Before installing, we must have a flash that has been transferred windows, then we make the flash as "windows 7, 8 flashdisk installer", then you can save it or re-format on other purposes in the future.

To transfer Windows XP / 7/8 / 8.1 to USB flash:

• Prepare the flash . Minimum of 4 Gb for Windows 7/8 and 2 Gb for Windows XP.
• Set up Windows 7 Sources . Can be from DVD pieces or ISO files stored on Hard Disk.
• Prepare Software Wintoflash . Needed to transfer Windows XP CD or DVD Windows 7/8 / 8.1 to flash.

Video Installing Windows 7 with Flashdisk

This is a video installation of windows 7 from flash (5 minutes), applies to 32-bit / 64-bit processor type, but in general can be used as a guide on other editions, because the process is almost the same only slightly different in appearance. This method has been repeatedly I try myself to various kinds of Hard disk both Computer, Laptop, Netbook, and 100% success, windows 7 operating system is successfully installed perfectly, without any problems.

Steps to Install Windows 7 Using Flashdisk

To install Windows 7 using USB Flashdisk:

1. Extract Software Download Results .
   After Preparation and Download program is completed, Then right click "Extract" using Winrar and Run Wintoflash.
2. Transfer Windows 7 to Flashdisk .
   When First run, There is a confirmation Approval, "I Accept" then Next and Next until the "Windows Setup Transfer Wizard" appears in step 3.
3. Select Advanced Mode .
   Windows Setup Transfer Wizard, Select Advanced Mode Tab.
   
   
   
   Then for Windows 7 Select Transfer Windows Vista / 2008/7/8 setup to USB drive, Then click Create. (For Windows XP Select Transfer Windows XP / 2003 setup to USB drive).
   
4. Select Windows Source Drive .
   Usually Windows CD / DVD or ISO file, especially for ISO shaped files with the latest version of wintoflash and flash drive to be transferred.
   
   
   
   As the picture above DVD Position Windows 7 can be on any drive, usually drive E, happens to have me in drive H.
   Like the picture below, here Flashdisk Position can be in any drive, I happen to have on drive I.
   
5. Click Run . Wait a few minutes until the transfer is complete, usually around 5-15 minutes, depending on the speed of the computer.
   If you have finished in exit only, and Flashdisk is already installed Windows and can be used.
   
6. Put Flashdisk .
   Attach the flash to the laptop / netbook / computer before it is turned on.Turn on the Laptop . Go to "BIOS Setup Menu" by pressing F2 WHEN LISTING LAPTOP or COMPUTER (On some other brands, maybe by pressing Esc, Del, F1 sometimes F10, sometimes + "fn" button).
7. If you do not know how, just look at the video.
   
   Notes, Menu Views Miscellaneous depending on the Brand Laptop or Computer.
8. Set First Boot to Flashdisk .
   Find the Boot Tab in the Top Menu and Choose the First Boot setting to USB Flashdisk - the settings are usually on the right side of the Menu (usually by pressing "Page Up / Page Down" or the +/- key), then Select Exit Tab and Save (Yes) Then Laptop will immediately "Restart". Happened to have me wearing a SanDisk Cruzer USB Brand.
   
9. Wait until the installation is complete . In this Step Installing Windows automatically will run as usual as installation using DVD installer.
   Click Here for More Detailed Process.
   
10. Unplug Flashdisk before Restart .
    Important, If the Windows Installation (Expanding Windows files) has finished, then it will Restart, and at that time Unplug the Flashdisk to avoid repetition of Windows 7 Setup, Then Windows will run by itself for the Advanced Installation "Finalizing Installation".
    
    
    
    Mandatory Unplug Flashdisk after this Restart Automatic, remove Flashdisk manual.
    Note, Except For Windows XP I have not tried it, maybe the flash is not revoked first, and setting boot in step 8, restored again, so the first Hard Disk Boot.
11. Continue Installation Process . After Restart, Windows will continue the installation (Finalizing Installation) automatically.
12. Automatic restart .
    After Restart the second time, then you will find that Windows 7 Installation Process With Flashdisk has Success.
13. Done .
    Congratulations hopefully the installation can run smoothly.
    

Every install of windows 7 should also install windows driver (available at the top of this article) such as "Graphics driver", "Audio Driver", "Network Driver" related to the branded driver, usually CD / DVD alone given when buying Laptop Or Computers, if there is no need to "download".